
BBS RS series
BBS RS223
- Size7x16"
- PCD4x108
- OffsetET30
- Centre bore63.5 mm
- Lip0.5"
- Barrel6"
This page covers the BBS RS223, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 7 inches wide and is listed for Ford Cosworth.
The 4x108 bolt pattern of the BBS RS223 is the one used by Ford, Peugeot and Citroën; the 63.5 mm centre bore decides whether you need hub-centric rings.
The BBS RS223 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 16-inch BBS RS223, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS223: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS223 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS223 | 4x108 | 16 | 7 | 30 | 63.5 | 0.5" | 6" | Ford Cosworth | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit