
BBS RS series
BBS RS224
- Size6.5x15"
- PCD5x114.3
- OffsetET45
- Centre bore60 mm
- Lip5/8"
- Barrel5 3/8"
This page covers the BBS RS224, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 6.5J x 15 and is listed for Toyota Mark II 88.
The 5x114.3 bolt pattern of the BBS RS224 is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
ET45 is a high offset for the BBS RS224, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 165-215 mm are the usual match for a 6.5-inch rim.
Before fitting a 15-inch BBS RS224, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS224 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS224 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS224 | 5x114.3 | 15 | 6.5 | 45 | 60 | 5/8" | 5 3/8" | Toyota Mark II 88 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit