BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS230

  • Size7.5x16"
  • PCD4x98
  • OffsetET18
  • Centre bore58.1 mm
  • Lip1.5"
  • Barrel5.5"

This page covers the BBS RS230, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 7.5 inches wide and is listed for Fiat, Lancia.

On the BBS RS230, the 4x98 PCD is the one used by Fiat, Alfa Romeo and Lada; the 58.1 mm centre bore decides whether you need hub-centric rings.

An offset of ET18 puts the BBS RS230 in the usual range for European saloons of its era. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting a 16-inch BBS RS230, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS230: lip 1.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS230 came from and how it is built is on the BBS RS page.

Specifications

BBS RS230 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2304x98167.51858.11.5"5.5"Fiat, Lancia—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models