BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS231

  • Size7x16"
  • PCD5x108
  • OffsetET52
  • Centre bore60 mm
  • Lip0.5"
  • Barrel6"

This page covers the BBS RS231, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 16-inch wheel, 7 inches wide and is listed for Renault R 25 Turbo.

On the BBS RS231, the 5x108 PCD is the one used by Ford, Volvo, Jaguar and Peugeot; the 60 mm centre bore decides whether you need hub-centric rings.

At ET52 the BBS RS231 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

At 16 inches, the BBS RS231 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS231 multi-piece build: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS231, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS231 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2315x10816752600.5"6"Renault R 25 Turbo—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models