
BBS RS series
BBS RS233
- Size8x17"
- PCD4x108
- OffsetET36
- Centre bore63.5 mm
- Lip1"
- Barrel6.5"
The BBS RS233 belongs to the classic three-piece RS family. It measures 8x17 inches and is listed for Ford Cosworth HA.
On the BBS RS233, the 4x108 PCD is the one used by Ford, Peugeot and Citroën; the 63.5 mm centre bore decides whether you need hub-centric rings.
At ET36 the BBS RS233 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
At 17 inches, the BBS RS233 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS233 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS233, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS233 | 4x108 | 17 | 8 | 36 | 63.5 | 1" | 6.5" | Ford Cosworth HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit