BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS234

  • Size8.5x17"
  • PCD5x130
  • OffsetET56
  • Centre bore71.6 mm
  • Lip0.5"
  • Barrel7.5"

The BBS RS234 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8.5J x 17 and is listed for Porsche 928 S VA.

On the BBS RS234, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

At ET56 the BBS RS234 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

At 17 inches, the BBS RS234 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS234: lip 0.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS234, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS234 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2345x130178.55671.60.5"7.5"Porsche 928 S VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models