
BBS RS series
BBS RS235
- Size9.5x17"
- PCD5x130
- OffsetET43
- Centre bore71.6 mm
- Lip1.5"
- Barrel7.5"
BBS RS235 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 9.5x17 inches and is listed for Porsche 928 S HA.
On the BBS RS235, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
At ET43 the BBS RS235 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.
At 17 inches, the BBS RS235 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS235 multi-piece build: lip 1.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS235 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS235 | 5x130 | 17 | 9.5 | 43 | 71.6 | 1.5" | 7.5" | Porsche 928 S HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit