BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS236

  • Size8.5x17"
  • PCD5x112
  • OffsetET30
  • Centre bore57 mm
  • Lip1"
  • Barrel7"

BBS RS236 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8.5J x 17 and is listed for Audi 200 V8.

On the BBS RS236, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS236 in the usual range for European saloons of its era. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting a 17-inch BBS RS236, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS236 multi-piece build: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS236, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS236 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2365x112178.530571"7"Audi 200 V8—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models