BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS237

  • Size8x15"
  • PCD4x100
  • OffsetET-10
  • Centre bore57 mm
  • Lip3"
  • Barrel4.5"

The BBS RS237 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 15-inch wheel, 8 inches wide and is listed for VW Golf 2.

The 4x100 bolt pattern of the BBS RS237 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

The BBS RS237 has a low ET-10 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 15 inches, the BBS RS237 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS237: lip 3", barrel 4.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS237 came from and how it is built is on the BBS RS page.

Specifications

BBS RS237 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2374x100158-10573"4.5"VW Golf 2—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models