
BBS RS series
BBS RS238
- Size6.5x15"
- PCD5x114.3
- OffsetET34
- Centre bore66 mm
- Lip0.5"
- Barrel5.5"
This page covers the BBS RS238, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 15-inch wheel, 6.5 inches wide and is listed for Nissan Maxima.
The 5x114.3 bolt pattern of the BBS RS238 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.
An offset of ET34 puts the BBS RS238 in the usual range for European saloons of its era. Tyre widths of roughly 165-215 mm are the usual match for a 6.5-inch rim.
At 15 inches, the BBS RS238 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS238: lip 0.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS238 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS238 | 5x114.3 | 15 | 6.5 | 34 | 66 | 0.5" | 5.5" | Nissan Maxima | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit