
BBS RS series
BBS RS239
- Size7x16"
- PCD4x114.3
- OffsetET37
- Centre bore66 mm
- Lip0.5"
- Barrel6"
The BBS RS239 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 16-inch wheel, 7 inches wide and is listed for Nissan 240 SX.
The 4x114.3 bolt pattern of the BBS RS239 is the one used by older Nissan and Mitsubishi; the 66 mm centre bore decides whether you need hub-centric rings.
At ET37 the BBS RS239 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
At 16 inches, the BBS RS239 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS239 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS239, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS239 | 4x114.3 | 16 | 7 | 37 | 66 | 0.5" | 6" | Nissan 240 SX | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit