BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS240

  • Size6x14"
  • PCD4x100
  • OffsetET40
  • Centre bore56 mm
  • Lip0.5"
  • Barrel5"

The BBS RS240 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 6x14 inches and is listed for Honda Accord Concerto CR-X.

On the BBS RS240, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 56 mm centre bore decides whether you need hub-centric rings.

At ET40 the BBS RS240 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 6-inch rim normally takes tyres from about 155 to 195 mm wide.

Before fitting a 14-inch BBS RS240, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS240 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS240, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS240 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2404x10014640560.5"5"Honda Accord Concerto CR-X—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models