BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS241

  • Size6x14"
  • PCD4x114.3
  • OffsetET35
  • Centre bore66 mm
  • Lip0.5"
  • Barrel5"

This page covers the BBS RS241, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 14-inch wheel, 6 inches wide and is listed for Nissan Bluebird, Silvia.

On the BBS RS241, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi; the 66 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS241, so it tucks well inside the arch, as front-drive and most modern cars need. A 6-inch rim normally takes tyres from about 155 to 195 mm wide.

Before fitting a 14-inch BBS RS241, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS241: lip 0.5", barrel 5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS241, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS241 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2414x114.314635660.5"5"Nissan Bluebird, Silvia—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models