
BBS RS series
BBS RS242
- Size6x14"
- PCD4x100
- OffsetET30
- Centre bore57 mm
- Lip0.5"
- Barrel5"
This page covers the BBS RS242, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 6J x 14 and is listed for Isuzu Gemini, Toyota MR2.
The 4x100 bolt pattern of the BBS RS242 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.
The BBS RS242 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 6-inch rim normally takes tyres from about 155 to 195 mm wide.
Before fitting a 14-inch BBS RS242, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS242: lip 0.5", barrel 5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS242, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS242 | 4x100 | 14 | 6 | 30 | 57 | 0.5" | 5" | Isuzu Gemini, Toyota MR2 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit