
BBS RS series
BBS RS246
- Size9x16"
- PCD5x114.3
- OffsetET41
- Centre bore66 mm
- Lip1"
- Barrel7.5"
The BBS RS246 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 16-inch wheel, 9 inches wide and is listed for Nissan Fairlady Z 89 HA.
The 5x114.3 bolt pattern of the BBS RS246 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.
ET41 is a high offset for the BBS RS246, so it tucks well inside the arch, as front-drive and most modern cars need. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 16 inches, the BBS RS246 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS246: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS246, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS246 | 5x114.3 | 16 | 9 | 41 | 66 | 1" | 7.5" | Nissan Fairlady Z 89 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit