
BBS RS series
BBS RS247
- Size8.5x16"
- PCD5x114.3
- OffsetET14
- Centre bore67 mm
- Lip2"
- Barrel6"
BBS RS247 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 8.5J x 16 and is listed for Toyota Crown.
On the BBS RS247, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.
The BBS RS247 has a low ET14 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
Before fitting a 16-inch BBS RS247, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS247: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS247 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS247 | 5x114.3 | 16 | 8.5 | 14 | 67 | 2" | 6" | Toyota Crown | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit