BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS248

  • Size8x15"
  • PCD4x100
  • OffsetET-23
  • Centre bore57 mm
  • Lip3.5"
  • Barrel4"

The BBS RS248 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 8 inches wide and is listed for VW Golf 2.

The 4x100 bolt pattern of the BBS RS248 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

The BBS RS248 has a low ET-23 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting a 15-inch BBS RS248, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS248 is a multi-piece wheel, so the lip and barrel are separate parts: lip 3.5", barrel 4". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS248 and its siblings, their construction and buying tips.

Specifications

BBS RS248 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2484x100158-23573.5"4"VW Golf 2—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models