BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS249

  • Size7x15"
  • PCD5x98
  • OffsetET30
  • Centre bore58.1 mm
  • Lip0.5"
  • Barrel6"

The BBS RS249 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 7 inches wide and is listed for Alfa 164.

The 5x98 bolt pattern of the BBS RS249 is the one used by Fiat and Alfa Romeo; the 58.1 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS249 in the usual range for European saloons of its era. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

At 15 inches, the BBS RS249 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS249 multi-piece build: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS249 came from and how it is built is on the BBS RS page.

Specifications

BBS RS249 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2495x981573058.10.5"6"Alfa 164—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models