
BBS RS series
BBS RS250
- Size8.5x16"
- PCD5x114.3
- OffsetET25
- Centre bore60 mm
- Lip1.5"
- Barrel6.5"
This page covers the BBS RS250, one wheel from the classic three-piece RS family. Size is 8.5J x 16 and is listed for Toyota Supra.
On the BBS RS250, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
An offset of ET25 puts the BBS RS250 in the usual range for European saloons of its era. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
Before fitting a 16-inch BBS RS250, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS250 multi-piece build: lip 1.5", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS250, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS250 | 5x114.3 | 16 | 8.5 | 25 | 60 | 1.5" | 6.5" | Toyota Supra | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit