BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS251

  • Size9x16"
  • PCD5x112
  • OffsetET30
  • Centre bore66.5 mm
  • Lip1.5"
  • Barrel7"

BBS RS251 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 9J x 16 and is listed for MB 124 VA.

On the BBS RS251, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

The BBS RS251 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting a 16-inch BBS RS251, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS251 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS251 came from and how it is built is on the BBS RS page.

Specifications

BBS RS251 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2515x1121693066.51.5"7"MB 124 VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models