BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS252

  • Size9x16"
  • PCD5x112
  • OffsetET30
  • Centre bore66.5 mm
  • Lip1.5"
  • Barrel7"

BBS RS252 is a part number from the classic three-piece RS family. It measures 9x16 inches and is listed for MB 124 VA.

The 5x112 bolt pattern of the BBS RS252 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS252 in the usual range for European saloons of its era. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

Before fitting a 16-inch BBS RS252, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS252 multi-piece build: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS252 came from and how it is built is on the BBS RS page.

Specifications

BBS RS252 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2525x1121693066.51.5"7"MB 124 VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models