
BBS RS series
BBS RS255
- Size8.5x16"
- PCD5x130
- OffsetET56
- Centre bore71.6 mm
- Lip0.5"
- Barrel7.5"
The BBS RS255 belongs to the classic three-piece RS family. Size is 8.5J x 16 and is listed for Porsche 928 S VA.
On the BBS RS255, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
At ET56 the BBS RS255 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
At 16 inches, the BBS RS255 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS255 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS255, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS255 | 5x130 | 16 | 8.5 | 56 | 71.6 | 0.5" | 7.5" | Porsche 928 S VA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit