
BBS RS series
BBS RS256
- Size9.5x16"
- PCD5x130
- OffsetET43
- Centre bore71.6 mm
- Lip1.5"
- Barrel7.5"
BBS RS256 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 9.5x16 inches and is listed for Porsche 928 S HA.
The 5x130 bolt pattern of the BBS RS256 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
At ET43 the BBS RS256 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.
At 16 inches, the BBS RS256 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS256 multi-piece build: lip 1.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS256 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS256 | 5x130 | 16 | 9.5 | 43 | 71.6 | 1.5" | 7.5" | Porsche 928 S HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit