BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS259

  • Size6.5x15"
  • PCD4x114.3
  • OffsetET36
  • Centre bore66 mm
  • Lip5/8"
  • Barrel5 3/8"

This page covers the BBS RS259, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 6.5 inches wide and is listed for Nissan Silvia, 240sx, 180sx, Cef.

On the BBS RS259, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi; the 66 mm centre bore decides whether you need hub-centric rings.

ET36 is a high offset for the BBS RS259, so it tucks well inside the arch, as front-drive and most modern cars need. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.

Before fitting a 15-inch BBS RS259, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS259: lip 5/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS259 and its siblings, their construction and buying tips.

Specifications

BBS RS259 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2594x114.3156.536665/8"5 3/8"Nissan Silvia, 240sx, 180sx, Cef—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models