BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS266

  • Size8x15"
  • PCD4x100
  • OffsetET-49
  • Centre bore57 mm
  • Lip4.5"
  • Barrel3.5"

The BBS RS266 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 15 and is listed for VW Golf, Corrado.

The 4x100 bolt pattern of the BBS RS266 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

The BBS RS266 has a low ET-49 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

Before fitting a 15-inch BBS RS266, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS266 is a multi-piece wheel, so the lip and barrel are separate parts: lip 4.5", barrel 3.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS266 and its siblings, their construction and buying tips.

Specifications

BBS RS266 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2664x100158-49574.5"3.5"VW Golf, Corrado—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models