
BBS RS series
BBS RS267
- Size9x17"
- PCD5x130
- OffsetET6
- Centre bore71.6 mm
- Lip2.5"
- Barrel6"
This page covers the BBS RS267, one wheel from the classic three-piece RS family. It is a 17-inch wheel, 9 inches wide and is listed for Porsche 930 VA.
The 5x130 bolt pattern of the BBS RS267 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
The BBS RS267 has a low ET6 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
Before fitting a 17-inch BBS RS267, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS267: lip 2.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS267, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS267 | 5x130 | 17 | 9 | 6 | 71.6 | 2.5" | 6" | Porsche 930 VA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit