
BBS RS series
BBS RS268
- Size7.5x16"
- PCD5x114.3
- OffsetET30
- Centre bore59.5 mm
- Lip1"
- Barrel6"
BBS RS268 is a part number from the classic three-piece RS family. Size is 7.5J x 16 and is listed for Mazda 626.
On the BBS RS268, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 59.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET30 puts the BBS RS268 in the usual range for European saloons of its era. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
Before fitting a 16-inch BBS RS268, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS268: lip 1", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS268, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS268 | 5x114.3 | 16 | 7.5 | 30 | 59.5 | 1" | 6" | Mazda 626 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit