
BBS RS series
BBS RS270
- Size8.5x17"
- PCD5x130
- OffsetET13
- Centre bore71.6 mm
- Lip2"
- Barrel6"
The BBS RS270 belongs to the classic three-piece RS family. It is a 17-inch wheel, 8.5 inches wide and is listed for Porsche 964.
On the BBS RS270, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
The BBS RS270 has a low ET13 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
Before fitting a 17-inch BBS RS270, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS270 multi-piece build: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS270 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS270 | 5x130 | 17 | 8.5 | 13 | 71.6 | 2" | 6" | Porsche 964 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit