
BBS RS series
BBS RS275
- Size10x17"
- PCD5x114.3
- OffsetET7
- Centre bore60 mm
- Lip3"
- Barrel6.5"
BBS RS275 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 10J x 17 and is listed for Toyota Supra HA.
On the BBS RS275, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.
The BBS RS275 has a low ET7 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 17 inches, the BBS RS275 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS275: lip 3", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS275 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS275 | 5x114.3 | 17 | 10 | 7 | 60 | 3" | 6.5" | Toyota Supra HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit