BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS276

  • Size9.5x17"
  • PCD5x112
  • OffsetET0
  • Centre bore66.5 mm
  • Lip3"
  • Barrel6.5"

The BBS RS276 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 9.5x17 inches and is listed for MB 124, 126 VA.

On the BBS RS276, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

With ET0 on the BBS RS276, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.

At 17 inches, the BBS RS276 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS276: lip 3", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS276, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS276 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2765x112179.5066.53"6.5"MB 124, 126 VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models