BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS280

  • Size7.5x16"
  • PCD4x114.3
  • OffsetET35
  • Centre bore64.1 mm
  • Lip1"
  • Barrel6"

This page covers the BBS RS280, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 16-inch wheel, 7.5 inches wide and is listed for Honda Accord 90.

The 4x114.3 bolt pattern of the BBS RS280 is the one used by older Nissan and Mitsubishi; the 64.1 mm centre bore decides whether you need hub-centric rings.

At ET35 the BBS RS280 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

At 16 inches, the BBS RS280 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS280 multi-piece build: lip 1", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS280, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS280 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2804x114.3167.53564.11"6"Honda Accord 90—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models