BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS279

  • Size6x15"
  • PCD4x114.3
  • OffsetET40
  • Centre bore64 mm
  • Lip5/8"
  • Barrel4 7/8"

BBS RS279 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 6x15 inches and is listed for Honda Accord, 89.

The 4x114.3 bolt pattern of the BBS RS279 is the one used by older Nissan and Mitsubishi; the 64 mm centre bore decides whether you need hub-centric rings.

ET40 is a high offset for the BBS RS279, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 155-195 mm are the usual match for a 6-inch rim.

Before fitting a 15-inch BBS RS279, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS279 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5/8", barrel 4 7/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS279, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS279 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2794x114.315640645/8"4 7/8"Honda Accord, 89—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models