
BBS RS series
BBS RS278
- Size7x15"
- PCD4x100
- OffsetET38
- Centre bore56.5 mm
- Lip5/8"
- Barrel5 7/8"
BBS RS278 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 7 inches wide and is listed for Opel Kadett E, Vectra.
On the BBS RS278, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 56.5 mm centre bore decides whether you need hub-centric rings.
At ET38 the BBS RS278 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
Before fitting a 15-inch BBS RS278, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS278 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5/8", barrel 5 7/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS278, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS278 | 4x100 | 15 | 7 | 38 | 56.5 | 5/8" | 5 7/8" | Opel Kadett E, Vectra | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit