BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS285

  • Size8.5x18"
  • PCD5x120
  • OffsetET13
  • Centre bore72.5 mm
  • Lip2"
  • Barrel6"

This page covers the BBS RS285, one wheel from the classic three-piece RS family. It measures 8.5x18 inches and is listed for BMW 5/H, 7/1, evtl.8.

The 5x120 bolt pattern of the BBS RS285 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET13 on the BBS RS285, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

At 18 inches, the BBS RS285 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS285 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: 17" center (doublestep).

More on where the BBS RS285 came from and how it is built is on the BBS RS page.

Specifications

BBS RS285 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2855x120188.51372.52"6"BMW 5/H, 7/1, evtl.817" center (doublestep)

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models