BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS294

  • Size9.5x17"
  • PCD5x112
  • OffsetET18
  • Centre bore66.5 mm
  • Lip2.5"
  • Barrel6.5"

The BBS RS294 belongs to the classic three-piece RS family. Size is 9.5J x 17 and is listed for MB 129 HA.

The 5x112 bolt pattern of the BBS RS294 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

An offset of ET18 puts the BBS RS294 in the usual range for European saloons of its era. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

At 17 inches, the BBS RS294 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS294: lip 2.5", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS294 came from and how it is built is on the BBS RS page.

Specifications

BBS RS294 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2945x112179.51866.52.5"6.5"MB 129 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models