
BBS RS series
BBS RS293
- Size8.5x17"
- PCD5x112
- OffsetET20
- Centre bore66.5 mm
- Lip1"
- Barrel7"
BBS RS293 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 8.5x17 inches and is listed for MB 129.
On the BBS RS293, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
The BBS RS293 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
At 17 inches, the BBS RS293 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS293: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS293 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS293 | 5x112 | 17 | 8.5 | 20 | 66.5 | 1" | 7" | MB 129 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit