BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS292

  • Size10x16"
  • PCD5x112
  • OffsetET30
  • Centre bore66.5 mm
  • Lip2"
  • Barrel7.5"

This page covers the BBS RS292, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 10 inches wide and is listed for MB 124.

On the BBS RS292, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS292 in the usual range for European saloons of its era. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

At 16 inches, the BBS RS292 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS292 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS292, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS292 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2925x11216103066.52"7.5"MB 124—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models