BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS291

  • Size8x16"
  • PCD4x114.3
  • OffsetET30
  • Centre bore66 mm
  • Lip1"
  • Barrel6.5"

This page covers the BBS RS291, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 8J x 16 and is listed for Nissan 200sx.

The 4x114.3 bolt pattern of the BBS RS291 is the one used by older Nissan and Mitsubishi; the 66 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS291 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

Before fitting a 16-inch BBS RS291, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS291: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS291 and its siblings, their construction and buying tips.

Specifications

BBS RS291 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2914x114.316830661"6.5"Nissan 200sx—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models