
BBS RS series
BBS RS290
- Size9.5x18"
- PCD5x112
- OffsetET18
- Centre bore72.5 mm
- Lip2.5"
- Barrel6.5"
BBS RS290 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is an 18-inch wheel, 9.5 inches wide and is listed for MB 129 HA.
On the BBS RS290, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 72.5 mm centre bore matches BMW hubs.
The BBS RS290 uses ET18, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.
At 18 inches, the BBS RS290 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS290 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2.5", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 17" center (doublestep).
For the history behind the BBS RS290, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS290 | 5x112 | 18 | 9.5 | 18 | 72.5 | 2.5" | 6.5" | MB 129 HA | 17" center (doublestep) |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit