
BBS RS series
BBS RS289
- Size8.5x18"
- PCD5x112
- OffsetET20
- Centre bore72.5 mm
- Lip1"
- Barrel7"
BBS RS289 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 8.5x18 inches and is listed for MB 129.
On the BBS RS289, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 72.5 mm centre bore matches BMW hubs.
The BBS RS289 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
At 18 inches, the BBS RS289 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS289: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 17" center (doublestep).
More on where the BBS RS289 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS289 | 5x112 | 18 | 8.5 | 20 | 72.5 | 1" | 7" | MB 129 | 17" center (doublestep) |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit