
BBS RS series
BBS RS296
- Size8.5x16"
- PCD5x112
- OffsetET22
- Centre bore66.5 mm
- Lip1"
- Barrel7"
This page covers the BBS RS296, one wheel from the classic three-piece RS family. It is a 16-inch wheel, 8.5 inches wide and is listed for MB 129 VA.
On the BBS RS296, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET22 puts the BBS RS296 in the usual range for European saloons of its era. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
At 16 inches, the BBS RS296 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS296: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS296 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS296 | 5x112 | 16 | 8.5 | 22 | 66.5 | 1" | 7" | MB 129 VA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit