BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS297

  • Size7x15"
  • PCD4x114.3
  • OffsetET40
  • Centre bore64.1 mm
  • Lip0.5"
  • Barrel6"

The BBS RS297 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 7x15 inches and is listed for Honda Accord 90.

The 4x114.3 bolt pattern of the BBS RS297 is the one used by older Nissan and Mitsubishi; the 64.1 mm centre bore decides whether you need hub-centric rings.

ET40 is a high offset for the BBS RS297, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 15-inch BBS RS297, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS297 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS297 came from and how it is built is on the BBS RS page.

Specifications

BBS RS297 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2974x114.31574064.10.5"6"Honda Accord 90—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models