BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS303

  • Size7x16"
  • PCD4x114.3
  • OffsetET40
  • Centre bore64.1 mm
  • Lip0.5"
  • Barrel6"

This page covers the BBS RS303, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7J x 16 and is listed for Honda Accord 90.

The 4x114.3 bolt pattern of the BBS RS303 is the one used by older Nissan and Mitsubishi; the 64.1 mm centre bore decides whether you need hub-centric rings.

ET40 is a high offset for the BBS RS303, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

At 16 inches, the BBS RS303 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS303 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS303, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS303 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3034x114.31674064.10.5"6"Honda Accord 90—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models