
BBS RS series
BBS RS304
- Size7.5x15"
- PCD5x100
- OffsetET30
- Centre bore54 mm
- Lip1 1/8"
- Barrel6"
This page covers the BBS RS304, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 7.5 inches wide and is listed for Toyota Celica 90.
On the BBS RS304, the 5x100 PCD is the one used by VW Group, Subaru and Toyota; the 54 mm centre bore decides whether you need hub-centric rings.
The BBS RS304 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
At 15 inches, the BBS RS304 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS304: lip 1 1/8", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS304, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS304 | 5x100 | 15 | 7.5 | 30 | 54 | 1 1/8" | 6" | Toyota Celica 90 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit