
BBS RS series
BBS RS305
- Size7.5x15"
- PCD5x114.3
- OffsetET30
- Centre bore59.6 mm
- Lip1 1/8"
- Barrel6"
This page covers the BBS RS305, one wheel from the classic three-piece RS family. Size is 7.5J x 15 and is listed for Mazda 626 MR2 90.
The 5x114.3 bolt pattern of the BBS RS305 is the one used by many Japanese and Korean cars; the 59.6 mm centre bore decides whether you need hub-centric rings.
The BBS RS305 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.
At 15 inches, the BBS RS305 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS305: lip 1 1/8", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS305, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS305 | 5x114.3 | 15 | 7.5 | 30 | 59.6 | 1 1/8" | 6" | Mazda 626 MR2 90 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit