BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS306

  • Size8x16"
  • PCD5x114.3
  • OffsetET43
  • Centre bore70 mm
  • Lip0.5"
  • Barrel7"

BBS RS306 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 8x16 inches and is listed for Honda NSX VA.

The 5x114.3 bolt pattern of the BBS RS306 is the one used by many Japanese and Korean cars; the 70 mm centre bore decides whether you need hub-centric rings.

ET43 is a high offset for the BBS RS306, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 16 inches, the BBS RS306 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS306: lip 0.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS306 and its siblings, their construction and buying tips.

Specifications

BBS RS306 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3065x114.316843700.5"7"Honda NSX VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models