
BBS RS series
BBS RS307
- Size9x17"
- PCD5x114.3
- OffsetET42
- Centre bore64 mm
- Lip1"
- Barrel7.5"
This page covers the BBS RS307, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 9J x 17 and is listed for Honda NSX HA.
On the BBS RS307, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 64 mm centre bore decides whether you need hub-centric rings.
At ET42 the BBS RS307 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 17 inches, the BBS RS307 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS307 multi-piece build: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS307 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS307 | 5x114.3 | 17 | 9 | 42 | 64 | 1" | 7.5" | Honda NSX HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit