BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS310

  • Size8x16"
  • PCD4x114.3
  • OffsetET38
  • Centre bore66 mm
  • Lip1.5"
  • Barrel6"

The BBS RS310 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 8J x 16 and is listed for Nissan Silvia HA.

On the BBS RS310, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi; the 66 mm centre bore decides whether you need hub-centric rings.

ET38 is a high offset for the BBS RS310, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 16 inches, the BBS RS310 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS310 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS310 came from and how it is built is on the BBS RS page.

Specifications

BBS RS310 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3104x114.316838661.5"6"Nissan Silvia HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models