BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS309

  • Size9x17"
  • PCD5x114.3
  • OffsetET25
  • Centre bore67 mm
  • Lip1.5"
  • Barrel7"

BBS RS309 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 9J x 17 and is listed for Toyota Crown 3L, 4L HA.

The 5x114.3 bolt pattern of the BBS RS309 is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.

An offset of ET25 puts the BBS RS309 in the usual range for European saloons of its era. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

Before fitting a 17-inch BBS RS309, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS309 multi-piece build: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS309, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS309 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3095x114.317925671.5"7"Toyota Crown 3L, 4L HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models