BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS315

  • Size8x17"
  • PCD4x100
  • OffsetET35
  • Centre bore56.5 mm
  • Lip1"
  • Barrel6.5"

The BBS RS315 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 17 and is listed for Opel Calibra.

On the BBS RS315, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 56.5 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS315, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

Before fitting a 17-inch BBS RS315, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS315: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS315 and its siblings, their construction and buying tips.

Specifications

BBS RS315 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS3154x1001783556.51"6.5"Opel Calibra—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models